Home › Resource Center › Logbooks and maintenance records
How to digitize your aircraft logbooks
Updated November 19, 2026 · About a 7-minute read
Most airplanes have one set of logbooks, kept in a box, a hangar or a shop. If they're lost, damaged or misplaced, that history is hard or impossible to replace, and the airplane is worth less. Turning them into digital records takes an evening or a weekend, depending on how many years you have. Here's how to do it so the result is actually useful: every entry readable, searchable, and tied to the original page.
Why bother digitizing?
- Answers in seconds. "When were the mags last done?" shouldn't mean an afternoon with a box of logbooks.
- A backup. A fire, a flood or a lost box at a shop can't take the airplane's history with it.
- Annuals and pre-buys go faster. Your A&P or a buyer's inspector can see the history without handling the originals.
- ADs and what's due. Once entries are typed up, they can be checked against ADs and inspection intervals.
A folder of photos or PDFs is a start, but it isn't searchable. Handwriting in a picture can't be searched, sorted by date or checked for an AD. The goal is typed-up entries with the original page kept beside each one.
Step 1: Gather everything
- Every airframe, engine and propeller logbook, including the old full ones. For a twin, each engine and prop has its own.
- Loose papers: Form 337s, AD compliance lists, weight & balance sheets, STCs, yellow tags and receipts.
- Your FAA records file for the aircraft (you can order a copy from the FAA Aircraft Registry). It holds 337s and airworthiness paperwork that sometimes never made it into the logbooks.
Put them in date order, oldest first, before you start.
Step 2: Number the pages
Before you scan anything, number every page in pencil in a top corner, logbook by logbook. It takes a few minutes and saves hours later: you'll always know which page a record came from, and you'll spot a missing page straight away.
Step 3: Set up for clean scans
- Good, even light. Daylight from a window or two lamps from the sides. Avoid glare on glossy pages.
- Lay the logbook flat on a dark, plain surface so the page edges stand out.
- Hold the phone straight above the page, not at an angle, so the whole page fits with a little border.
- Faded pencil and old carbon copies scan better with more light, not with the flash.
Step 4: Scan one logbook at a time
Work through one logbook before starting the next, so every page lands in the right place. With the free GALogbook Scanner App (iPhone and Android) you pick the aircraft and the logbook (airframe, engine or prop) first, then scan. When an entry runs onto a second page, scan both pages as one entry so they stay together.
Already have your logbooks scanned as PDFs or photos? You don't need to scan again. Upload the files (PDF, JPG or PNG) and choose the right logbook for them.
Step 5: Let the handwriting get typed up, then check it
This is the step that makes the records useful. GALogbook reads the handwriting and types up each entry: the date, tach and total time, and the work performed. You then see the typed entry side by side with the original page, fix anything that was read wrong, and save it.
Step 6: Look for gaps
With everything in date order, read through the history the way a pre-buy inspector would:
- Is there an annual inspection for every year the airplane was flying?
- Do the tach and total times only go up, without unexplained jumps?
- Is there a 337 for each major repair or alteration you know about?
- Are ADs signed off where they apply?
Finding a gap now, while you can still track down a shop's records or a previous owner, is far better than finding it during a sale.
Step 7: Keep the originals
A digital copy is a backup and a working tool. It doesn't mean you throw the paper away. Keep the original logbooks somewhere dry and safe (a fire-resistant box is cheap insurance), never mail them unless you have to, and when you sell the airplane, the logbooks go with it.
The FAA allows electronic records. See what the FAA's AC 120-78B says. Owners remain responsible for keeping the maintenance records required by 14 CFR 91.417.
Going forward: keep it up to date
Once the history is in, new work is easy to add. Type an entry on the website, or your A&P can text it in from the ramp and review it when the job is done. GALogbook prints each new entry on a 3×6 label you can stick into the paper logbook, so the paper and digital records always match.
The short version
- Gather every logbook and loose paper, oldest first.
- Number the pages in pencil.
- Good light, flat page, phone straight above it.
- Scan one logbook at a time.
- Check each typed entry against the original page, then save it.
- Read through for gaps.
- Keep the originals safe.
Get started → How to choose logbook software →