Home › Resource Center › ADs and compliance

How to track AD compliance on your aircraft

Updated November 19, 2026 · About a 7-minute read

An Airworthiness Directive isn't a recommendation; it's a legally enforceable rule with its own deadline. Missing one can ground the airplane, and a sloppy AD record is one of the first things a buyer's mechanic finds. Here is how ADs work, how to find every one that applies to your aircraft, and what your records have to show, with the FAA source for each point listed at the bottom.

General information from FAA rules and guidance for type-certificated aircraft, not legal advice. Your A&P or IA decides how each AD applies to your aircraft.

What an AD is, and who is responsible

  • ADs are legally enforceable rules that apply to aircraft, engines, propellers and appliances (14 CFR 39.3). The FAA issues one when an unsafe condition exists in a product and is likely to exist or develop in others of the same type design (39.5).
  • The owner or operator is primarily responsible for keeping the aircraft airworthy, including compliance with ADs (14 CFR 91.403(a)).
  • Operating a product that doesn't meet an applicable AD is a violation, and it's a separate violation each time you fly (39.7 and 39.9). FAA guidance (AC 39-7D) notes that "operate" includes authorizing someone else to fly it.
  • An AD still applies after the product has been modified, altered or repaired in the area the AD covers (39.15). If the change affects your ability to do what the AD requires, you have to ask the FAA for an alternative method of compliance (AMOC) (39.17), and you may use an alternative only once the FAA approves it (39.19).

The kinds of ADs

AC 39-7D describes three:

  • Proposed rule, then final rule: the most common. The FAA proposes it, takes comments, then publishes the final AD.
  • Final rule with request for comment (an "immediately adopted rule"): used when the problem can't wait for the usual comment period.
  • Emergency ADs: for urgent safety problems. They are effective for the people who receive actual notice, sent by mail or fax to registered owners, before they appear in the Federal Register. That's one more reason to keep your address current with the FAA Aircraft Registry.

Step 1: Find every AD that could apply

ADs are issued against the airframe, the engine, the propeller and appliances (any instrument or equipment installed that isn't part of the airframe, engine or prop, as defined in 14 CFR 1.1). An AD list that only covers the airframe is not complete. Search for each one:

  • Airframe: make and model, from the aircraft's type certificate data sheet.
  • Engine and propeller: their own make and model, from the data plates and logbooks.
  • Appliances: installed equipment such as instruments and radios.

The FAA publishes ADs in its Dynamic Regulatory System (drs.faa.gov), where AD rules can be filtered by make and model. You can also sign up on the FAA's Airworthiness Directives page for email delivery of new ADs and Special Airworthiness Information Bulletins for your aircraft's make and type.

Read each AD's applicability statement. It can be limited to certain serial numbers; when it lists no serial numbers, it covers all of them (AC 39-7D). When you find an AD that doesn't apply, for example because your serial number is outside its range, note why, so nobody has to work it out again.

Step 2: Read the compliance time

AC 39-7D calls it a mistaken belief that AD compliance is only required at the annual or 100-hour inspection. Each AD sets its own deadline: "prior to further flight," within a number of hours time-in-service, within a number of landings or cycles, or by a calendar date. After that deadline, the product can't be operated unless the FAA has approved a change in compliance time.

If you need to fly the aircraft to a shop to do the AD work, the FAA may issue a special flight permit unless the AD says otherwise (14 CFR 39.23).

Step 3: Get the work done and logged

  • AC 39-7D says the owner meets the responsibility by having properly certificated, appropriately rated maintenance people do the AD and record it.
  • The person who does the AD makes a maintenance record entry under 14 CFR 43.9: a description of the work, the date, and their signature, certificate number and kind of certificate.
  • Some ADs allow a pilot-owner to do a simple action themselves. When that's allowed, the AD says so. For example, an AD published November 2, 2026 (effective December 7, 2026) for Diamond DA 40, DA 40 F and DA 40 NG airplanes lets an owner/operator holding at least a private pilot certificate revise the flight manual, and requires that compliance be entered in the records under 43.9(a) and 91.417(a)(2)(v).
  • When an AD incorporates a manufacturer's service document by reference, that document becomes part of the AD, and if the two conflict you follow the AD (14 CFR 39.27). A document an AD only mentions for information doesn't become mandatory that way.

Step 4: Keep the AD status record

Under 14 CFR 91.417(a)(2)(v), your records must show the current status of every applicable AD, including for each one:

  • the AD number and revision date;
  • the method of compliance;
  • for a recurring AD, the time and date when the next action is due.

The revision date is the effective date of the AD's latest amendment, found in the body of the AD; for an emergency AD it is the date it was issued (AC 39-7D). AC 43-9D says a separate AD record may be kept for the airframe and each engine, propeller and appliance (it isn't required), and that record can then go with the item if it's removed. Appendix A of that AC shows a suggested format; following it isn't mandatory.

The status list is your summary; the logbook entries are the proof. For each AD on the list, you should be able to point to the entry that shows it was done.

Step 5: Watch the recurring ADs

Some ADs repeat at an interval of hours or time. An AD may allow its interval to be adjusted to line up with your regular inspections, under the conditions stated in that AD; any other change to the compliance time needs an approved AMOC (AC 39-7D). Track the next due time and date for each one, not just the last time it was done.

What the annual does, and doesn't, cover

The person doing an annual or 100-hour inspection must determine whether the aircraft meets all applicable airworthiness requirements (14 CFR 43.15(a)), which AC 39-7D says includes compliance with ADs. That doesn't move the responsibility: the owner remains primarily responsible for AD compliance all year (91.403(a)), including ADs that come due between inspections.

How GALogbook helps

  • AD search: searches the FAA's ADs for your aircraft, engine and prop. Appliance ADs (on installed equipment) still need their own search by the appliance's make and model or part number.
  • Proof from the logbooks: helps find the logbook entry that shows each AD was done, with the original page one click away.
  • Ask a question: ask in plain English when a recurring AD was last done, and get the answer with the page it came from.
See your AD picture with your own logbooks. Start the 7-day free trial, scan your logbooks, and run the AD search for your aircraft, engine and prop.

Get started →   How to digitize your logbooks →

Sources