Home › Resource Center › Logbooks and maintenance records

Lost or missing aircraft logbooks: what to do

Updated November 19, 2026 · About a 7-minute read

Logbooks get lost in fires, floods and moves, left behind at a shop, or kept by a seller who never handed them over. FAA guidance (AC 43-9D) describes how to rebuild them, and it's worth following closely, because some records can be rebuilt from your research and some can't. Below are the steps, with the FAA source for each one listed at the bottom of the page.

This guide is about the aircraft's maintenance records. A lost pilot logbook is a different process. This is general information from FAA rules and guidance, not legal advice; your A&P or IA decides what your aircraft needs.

Why it matters

The owner is responsible for keeping the aircraft's records. Under 14 CFR 91.417 they must show:

  • the total time in service of the airframe, each engine and each propeller;
  • the current status of life-limited parts;
  • the time since last overhaul of anything that must be overhauled on a time basis;
  • the current inspection status;
  • the current status of every applicable AD: the AD number, revision date, how it was complied with, and when the next action is due if it recurs;
  • copies of the Form 337 for each major alteration.

Those records stay with the aircraft and go to the buyer when it's sold (14 CFR 91.417(b)(2) and 91.419). The FAA's maintenance records circular, AC 43-9D, also warns that insufficient or nonexistent records may make the aircraft's Airworthiness Certificate invalid.

Step 1: Make sure they're really gone

  • Check the hangar, the airplane, your home and office, and the shop that did your last annual or other work.
  • Just bought the airplane? The seller was required to transfer these records to you at the time of sale (14 CFR 91.419). Ask for them in writing. The FAA won't retrieve logbooks from another person for you, so if a seller or shop refuses to hand them over, talk to an aviation attorney.
  • Ask your insurance agent whether your policy covers the cost of rebuilding the records.

Step 2: Collect every record that still exists

AC 43-9D (paragraph 15) says to rebuild from other records that show time in service, from records kept by repair facilities, and from records kept by individual mechanics. Places to look:

  • Any logbooks you still have. If only one is missing, the others still hold dated entries. Every annual and 100-hour inspection entry must include the date and the aircraft's total time in service (14 CFR 43.11(a)(2)), so each one you find pins down the time on that date.
  • Shops and mechanics who worked on the airplane: ask for copies of work orders, invoices and entries they made.
  • Your own papers: invoices, receipts, pre-buy reports, photos or scans of logbook pages, and anything with a date and a tach or Hobbs reading.
  • The FAA's file on your aircraft. The FAA Aircraft Registry sells a copy for $10 on CD-ROM (or 10 cents a page on paper), and you can order it online. It holds the aircraft's registration and ownership papers and the airworthiness documents the FAA has received. Mechanics are required to send the FAA a copy of most Form 337s (14 CFR Part 43, Appendix B), so this is where to recover your major repairs and alterations.
  • Previous owners. The FAA file shows who they were. They may have kept copies, scans or invoices.

A Hobbs or tach reading helps you work out time in service, but AC 43-9D (paragraph 11.2) notes that the meter alone doesn't meet the record-keeping rule.

Step 3: Re-establish the total time

The FAA's first step is the airframe's total time in service, worked out from the records you collected. If the record is still incomplete after that research, AC 43-9D (paragraph 15) says the owner may make a notarized statement in the new record describing the loss and establishing the time in service, based on the research and the best estimate of time in service.

Keep a copy of every document you used, and list them, so your A&P, a future buyer or the FAA can see how the number was reached.

Step 4: Re-establish AD compliance (usually the hardest part)

AC 43-9D (paragraph 15.1) calls the AD status a more formidable problem than the total time. It may take a detailed inspection by maintenance personnel to establish that the ADs were complied with. That can mean considerable time and expense, and in some cases the AD has to be done again.

AC 43-9D (paragraph 8.7.1.2) also says times worked out this way are not acceptable where life-limited parts or AD compliance are involved: only the actual record, since new, may be used. A notarized estimate of total time doesn't settle either one.

In practice, that starts with a full list of the ADs for your airframe, engine, propeller and appliances. Your A&P or IA then establishes each one and records it with the AD number, revision date, method of compliance and, for recurring ADs, when the next action is due.

Step 5: The rest of the required records

AC 43-9D (paragraph 15.2) warns that the other required items, the status of life-limited parts, time since overhaul, current inspection status and the list of major alterations, may present complex problems too:

  • Major alterations: use the 337 copies from the FAA file (Step 2).
  • Inspection status: a new annual inspection gives you a current inspection status from that day on.
  • Time since overhaul: rebuild it the same way as total time (AC 43-9D, paragraph 8.7.3), starting with the overhaul shop's paperwork.
  • Life-limited parts: these need the actual records (Step 4). Talk them through with your A&P or IA.

One exception: when an engine is rebuilt to zero time by its manufacturer or an agency the manufacturer approves, 14 CFR 91.421 allows a new engine record without the previous operating history.

Step 6: Start the new logbooks, and protect them

  • Begin the new logbooks with the notarized statement (if you needed one), followed by your A&P's entries for the inspection and the ADs.
  • File copies of everything you collected with the new logbooks.
  • Scan every page, keep a copy somewhere other than where the originals live, and scan again after each annual.

AC 43-9D sums it up: losing maintenance records can be troublesome, costly and time-consuming, and safekeeping of the records is an integral part of a good record-keeping system. The same circular (paragraph 16) notes that owners may use a commercial app or service to scan their records into a secure, searchable digital format.

How GALogbook helps

  • A copy you can't lose: scan your logbooks with the free iPhone or Android app. Every entry is typed up and checked against the original page, backed up every night, with an encrypted copy kept off-site.
  • Your FAA file, sorted: upload the aircraft records file from the FAA Registry and every 337 is found and filed.
  • ADs: searches the FAA's ADs for your aircraft, engine and prop, and helps find the entry that shows each AD was done.
  • Answers with the page: ask a question in plain English and get the answer with the original logbook page it came from.
Still have your logbooks? Make a copy before something happens. Start the 7-day free trial and scan the first logbook today.

Get started →   How to digitize your logbooks →

Sources