Home › Resource Center › Logbooks and maintenance records
Owner preventive maintenance: what's allowed and how to log it
Updated November 19, 2026 · About a 6-minute read
If you hold at least a private pilot certificate, the FAA lets you do certain simple maintenance on an aircraft you own or operate, and sign it off yourself. The rules are narrower than many owners think, and the logbook entry has specific requirements. Here's what the FAA says, with the source for each point at the bottom.
This covers standard type-certificated aircraft. Part 43 generally doesn't apply to experimental aircraft (14 CFR 43.1(b)); it does apply to special light-sport aircraft, with a few exceptions (43.1(d)). Not legal advice.
What counts as preventive maintenance
The FAA defines preventive maintenance as "simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operations" (14 CFR 1.1). The work it covers is the list in 14 CFR Part 43, Appendix A, paragraph (c). FAA guidance is blunt: if a task isn't on that list, it isn't preventive maintenance (AC 43-12A). And because each item is limited to work that doesn't involve complex assembly operations, a task can be preventive maintenance on one aircraft and not on another; owners have to use good judgment.
Some items from the list, in the FAA's wording or close to it:
- Removal, installation and repair of landing gear tires; servicing wheel bearings, such as cleaning and greasing.
- Servicing landing gear shock struts by adding oil, air, or both.
- Replacing defective safety wiring or cotter keys.
- Lubrication not requiring disassembly other than removal of nonstructural items such as cover plates, cowlings and fairings.
- Replacing or cleaning spark plugs and setting spark plug gap clearance.
- Cleaning or replacing fuel and oil strainers or filter elements.
- Replacing and servicing batteries.
- Replacing bulbs, reflectors and lenses of position and landing lights.
- Replacing safety belts; replacing seats or seat parts with approved replacement parts, without disassembling primary structure or an operating system.
- Replacing any hose connection except hydraulic connections; replacing prefabricated fuel lines.
- Replacing side windows, and making small simple repairs to fairings, nonstructural cover plates and cowlings, within the limits the list sets.
- Removing and replacing self-contained, front-panel-mounted nav and com units with tray-mounted connectors, designed to be readily and repeatedly removed, excluding automatic flight control systems, transponders and DME, with an operational check before use.
Read the full list in Appendix A before you start: many items carry conditions, such as no disassembly of primary structure or operating systems.
Who may do it, and sign it off
- A pilot certificated under Part 61 may perform preventive maintenance on an aircraft they own or operate that isn't used under Part 121, 129 or 135 (14 CFR 43.3(g)). A sport pilot may do so only on an aircraft with a special airworthiness certificate in the light-sport category.
- Approving the aircraft for return to service after preventive maintenance takes at least a private pilot certificate (14 CFR 43.7(f)); a sport pilot may approve it only on their own light-sport category aircraft (43.7(h)). Either way, a pilot may approve only the work they did themselves (AC 43-12A).
- No one may fly the aircraft after the work until it has been approved for return to service and the logbook entry has been made (14 CFR 91.407(a)).
The standards still apply
Owners doing preventive maintenance are held to the same performance rules as mechanics (14 CFR 43.13; AC 43-12A):
- Use the methods, techniques and practices in the manufacturer's current maintenance manual or instructions for continued airworthiness, or others acceptable to the FAA.
- Use the tools, equipment and test apparatus needed to do the job to accepted industry practices.
- Leave the item at least equal to its original or properly altered condition.
AC 43-12A adds a caution worth repeating: some tasks that look simple are not, so make sure you understand the manufacturer's instructions and that the job is within your ability.
How to write the entry (14 CFR 43.9)
Make the entry in the maintenance record of the item you worked on, with:
- a description of the work, or a reference to data acceptable to the FAA (such as the manufacturer's manual);
- the date the work was completed;
- your signature, certificate number and kind of certificate. FAA guidance says pilots can show the kind of certificate clearly, for example PP, CP or ATP (AC 43-12A).
Your signature on the entry is the approval for return to service for that work. A sample (example only; placeholders in brackets):
The rule doesn't require the aircraft's time in service in a preventive maintenance entry, but adding the tach or Hobbs reading makes the record easier to line up with other entries.
Not maintenance at all: database updates
Updating the databases in installed avionics isn't considered maintenance, and a pilot may do it, when the update is started from the flight deck, without disassembling the unit and without tools or special equipment, following the manufacturer's instructions (14 CFR 43.3(k)).
How GALogbook helps
- Log it right away: record the work in GALogbook with the date and description, and print it on a label for the paper logbook.
- Find it later: ask "When were the plugs last cleaned?" and get the answer with the page it came from.
Get started → What an annual entry must say →
Sources
- 14 CFR 1.1, definition of preventive maintenance.
- 14 CFR Part 43: 43.1, 43.3(g) and (k), 43.7(f) and (h), 43.9, 43.13, and Appendix A, paragraph (c).
- 14 CFR 91.407, operation after maintenance.
- FAA AC 43-12A, Preventive Maintenance, with Change 1 (April 18, 2007), paragraph 3.